Indoor Wall Mounted 1-4 Port Roseta FTTH Faceplate Box
Description
The product is used as a termination point for the feeder cable to connect with drop cable in FTTH communication network system.The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTH network building.
Feature
- It is used for different kinds of modules and applied to the working area subsystem.
- It uses embedded surface frame, easy to install and disassemble, it is with protective door and dusty free, can do OEM for any customers and print requested LOGO.
- With application of fiber SC/LC simplex, duplex and other different environment installed plate or flush plate. All modules can be configured on customer's choice.
- Cable management can be connected without cutting(with express port)
- All modules are free of welding.
Working area
- The telecommunication network, metropolitan area network, optical fiber communication system.
- Optical testing equipment/instrument.
- CATV optical fiber, optical fiber sensor.
- Optical fiber broadband access network, FTTH optical fiber.
- Optical fiber distribution frame, frame type and wall type optical fiber distribution unit.
Performance index
| Item |
Technical data |
| Application |
3.0 x 2.0 mm drop cable or indoor cable |
| Fiber diameter |
125μm ( 652 & 657 ) |
| Tight cladding diameter |
250μm & 900μm |
| Mode of application |
Single mode & duplex mode |
| Tensile strength |
>50 N |
| End-use temperature |
-40~+85ºC |
| Adaptor |
SC & LC |
| Insertion loss |
≤0.2dB(1310nm & 1550nm) |
| output |
4 |
Configuration table
Model and configuration
| Model |
Size(Pic 1) |
Max Capacity |
| A*B*C(mm) |
SC |
LC |
| TKS-1805-04B |
100.6*80.6*28.8 |
4 |
8 |
Audited Supplier 
){kind=link}