0-60dB in-Line Variable Fiber Optic Attenuator
Introduction:
In-line Variable Fiber Optic Attenuator is a adjustable component installed in a fiber optic transmission system that reduces the power in the optical signal.
It is often used to limit the optical power received by the photodetector to within the limits of the optical receiver.connector types can mount for FC,SC,LC,ST,FC/SC,SC/ST,etc. adapters. Attenuation range value:0.5~65dB
Features:
Low back reflection and Low PDL
High precision attenuation value
Precision control of attenuation range
Wide attenuation range
Precision ceramic ferrule FC, SC, LC, ST, FC/SC, SC/ST MU optionalPlastic or metal housing material
Application:
Fiber optical telecommunication system
Fiber optical CATV
Fiber optical sensor
Testing equipment
Specification:
| Operating Wavelength(nm) |
650 |
850 980 1260~1620 |
| Attenuation Range(dB): |
|
|
0.5~65 |
|
| Return Loss(dB): |
|
|
>50 |
|
| PDL(dB): |
|
|
<0.1 |
|
| Power Handling(mw): |
|
|
300 |
|
| Operating Temperature(°C) |
|
|
-5~70 |
|
| Storage Temperature(°C) |
|
|
-40~85 |
|
| Fiber Type: |
|
|
Customerized |
|
| Fiber Length(m): |
|
|
Customerized |
|
| Connector: |
|
|
Customerized |
|
| Isolation Type |
Operating Wavelength |
Fiber Type |
Optical Length |
In/Out Connector |
| |
1260~1620 |
1=250um bare fiber |
|
1=FC/APC |
| SM=Single Mode |
2=900um Loose tube |
1=1m |
2=FC/PC |
| or |
| MM=MultiMode |
3=2mm Cable |
1.5=1.5m |
3=SC/APC |
| Customerized |
| |
4=3mm Cable |
|
4=SC/PC |
| |
|
|
| |
|
|
|
|
5=LC |
Any question about this item, please leave me an inquiry or contact me directly.
){kind=link}
){kind=link}