Waterproof Outdoor IP65 16 Port FTTH Fiber Terminal Box
16 port Fiber terminal box is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.It intergtates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTx network building.
1.Description
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
2.16 port fiber terminal box Features
a.Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65.
b.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.
c.Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type d.SC/LC/PLC adaptor installation, easy maintenance.
e.Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
f.Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
3.Specification
a. Environmental requirement
Working temperature:-40ºC~+85ºC
Relative humidity:≤85%(+30ºC)
Atmospheric pressure:70KPa~106Kpa
b. Main technical datasheet
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
c. Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than 2MΩ/500V(DC);IR≥2MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover;U≥3000V
4.Configuration table
Table 1 Model and configuration
Model |
Description |
Size(Pic 1) |
Max Capacity |
Installation Size(Pic 2) |
Cable Enty |
A*B*C(mm) |
SC |
LC |
PLC |
D*E (mm) |
FTKS-1805-16F |
Splitter Box |
300*222*73 |
16 |
32 |
32(LC) |
157.5*82 |
Express/not Express |
5.Installation
a.Wall-mounted installation
Drill 4 holes over the wall based on the size in table 1,place the expansion bolt Φ7.5*40,place the box to match up the holes and use bolt to fasten
b.Pole-mounted installation
6.Accessories
a. Users' Manual*1.
b. Key*1.
c. Accessories Bag * 1.
d. Easy pole ring*2.(Option)
Any query about this
16 port fiber terminal enclosure,please leave me an inquiry or contact me directly via trade messenger.