Customization: | Available |
---|---|
Type: | Fiber Transceiver |
Wiring Devices: | ODF |
Still deciding? Get samples of US$ 30/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Features
Applications
1. Absolute Maximum Ratings
Parameter | Symbol | Min. | Typical | Max. |
Storage Temperature | TS | -40 | - | +85 |
Supply Voltage | VCC | -0.5 | - | +4.0 |
Operating Relative Humidity | RH | - | - | +85 |
2. Recommended Operating Conditions
Parameter | Symbol | Min. | Typical | Max. | Unit |
Operating Case Temperature TKSFP25GCW20 | TC | -5 | - | +70 | °C |
Operating Case Temperature TKSFP25GCW20I | TC | -40 | - | +85 | °C |
Power Supply Voltage | VCC | 3.13 | 3.3 | 3.47 | V |
Power Supply Current | ICC | - | - | 0.35 | A |
Maximum Power Dissipation | PD | - | - | 1.2 | W |
Lane Bit Rate | BRLANE | 24.3 | 25.78 | 26.5 | Gb/s |
Transmission Distance | TD | - | 20 | km |
3. Optical Characteristics
Transmitter | ||||||
Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
Center Wavelength | λ0 | 1XX0-6 | 1XX0 | 1XX0+6 | nm | |
Average Launch Power | PTX_LANE | -3 | - | 2 | dBm | 1,2 |
Spectral Width (-20dB) | σ | - | - | 1 | dBm | 3 |
Optical Modulation Amplitude | OMA | -4 | - | 2.2 | dBm | 4 |
Launch power in OMA minus TDP (min) | OMA_TDP | -5 | - | - | dBm | |
Difference in launch power between lanes | PTX_DELTA_LANE | - | - | 3.6 | dB | |
Average Output Power (Laser Turn off) | Pout-OFF | - | - | -30 | dBm | |
Side Mode Suppression Ratio | SMSR | 30 | - | - | dB | |
Extinction Ratio, 100GE | ER | 3.5 | - | - | dB | |
Transmitter and dispersion penalty (TDP) | TDP | - | - | 2.7 | dB | |
Optical Return Loss Tolerance | ORLT | - | - | 20 | dB | |
Optical Eye Mask | Compliant with IEEE 802.3cc Draft 3.0 | |||||
Receiver | ||||||
Center Wavelength | λ0 | 1260 | 1380 | nm | ||
Receiver sensitivity (OMA) | - | - | -12.3 | dBm | 5 | |
Stress sensitivity (OMA) | - | - | -9.8 | dBm | 6 | |
Receiver Overload | PIN-OL | 3 | - | - | dBm | |
Reflectance | Ref | - | - | -12 | dB | |
LOS Assert per lane | LOSA | -30 | - | - | dBm | |
LOS De-assert | LOSD | - | - | -17 | dBm | |
LOS Hysteresis | LOSH | 0.5 | - | 4 | dB |
Notes:
1. Class 1 Laser Safety per FDA/CDRH and EN (IEC) 60825 regulations.
2. High Bandwidth Mode. Class 1 Laser Safety per FDA/CDRH and EN (IEC) 60825 regulations.
3. 20dB spectral width.
4. Equivalent extinction ratio specification for Fibre Channel. Allows smaller ER at higher average power.
5. At 5E-5 BER, KR4 FEC
6. Per IEEE802.3cc
4. Electrical Characteristics
Transmitter (Module Input) | |||||||
Parameter | Symbol | Min. | Typical | Max. | Unit | Notes | |
Differential Data Input Amplitude | VIN,P-P | 90 | - | 800 | mVpp | ||
Differential Termination Mismatch | - | - | 5 | % | |||
Tx_Disable |
Normal Operation | VIL | -0.3 | - | 0.8 | V | |
Laser Disable | VIH | 2.0 | - | VCC+0.3 | V | ||
Receiver (Module Output) | |||||||
Differential Data Output Amplitude | VOUT,P-P | 185 | - | 425 | mVpp | ||
Differential Termination Mismatch(1MHZ) | - | - | 5 | % | |||
Output Rise/Fall Time, 20%~80% | TR | 12 | - | - | ps | ||
Rx_LOS |
Normal Operation | VOL | - | - | 0.2 | V | |
Lose Signal | VOH | VCC-0.2 | - | - | V |
|
5. Pin Descriptions
Pin | Symbol | Description | Ref. |
1 | VEET | Transmitter Ground (Common with Receiver Ground) | 7.1 |
2 | TFAULT | Transmitter Fault. Not supported. | |
3 | TDIS | Transmitter Disable. Laser output disabled on high or open. | 7.2 |
4 | MOD_DEF(2) | Module Definition 2. Data line for Serial ID. | 7.3 |
5 | MOD_DEF(1) | Module Definition 1. Clock line for Serial ID. | 7.3 |
6 | MOD_DEF(0) | Module Definition 0. Grounded within the module. | 7.3 |
7 | RS0 | Rate Select0, optionally controls SFP+ module receiver. When high input signaling rate>4.25 GBd and when low input signaling rate<4.25GBd | |
8 | LOS | Loss of Signal indication. Logic 0 indicates normal operation. | 7.4 |
9 | RS1 | Rate Select1, optionally controls SFP+ module receiver. When high input signaling rate>4.25 GBd and when low input signaling rate<4.25GBd | |
10 | VEER | Receiver Ground (Common with Transmitter Ground) | 7.1 |
11 | VEER | Receiver Ground (Common with Transmitter Ground) | 7.1 |
12 | RD- | Receiver Inverted DATA out. AC Coupled. | |
13 | RD+ | Receiver Non-inverted DATA out. AC Coupled. | |
14 | VEER | Receiver Ground (Common with Transmitter Ground) | 7.1 |
15 | VCCR | Receiver Power Supply | |
16 | VCCT | Transmitter Power Supply | |
17 | VEET | Transmitter Ground (Common with Receiver Ground) | 7.1 |
18 | TD+ | Transmitter Non-Inverted DATA in. AC Coupled. | |
19 | TD- | Transmitter Inverted DATA in. AC Coupled. | |
20 | VEET | Transmitter Ground (Common with Receiver Ground) | 7.1 |
Notes:
7.1 Circuit ground is internally isolated from chassis ground.
7.2 Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
7.3 Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.
7.4 LOS is open collector output. Should be pulled up with 4.7k -10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
6. EEPROM & DDM THRESHOLD
6.1 EEPROM
2 wire address 1010000X (A0h)
0~95 Serial ID Defined by SFP MSA (96 bytes) |
96~127 Vendor Speific (32 bytes) |
128~255 Reserved (128 bytes) |
6.2 DDM THRESHOLD
Low Alarm | Low Warn | High Warn | High Alarm | |
Temperature TKSFP25GCW20 | -10ºC | -5ºC | 75ºC | 80ºC |
Temperature TKSFP25GCW20I | -45ºC | -40ºC | 80ºC | 85ºC |
Voltage | 3V | 3.1V | 3.5V | 4V |
Tx Bias | 10mA | 20mA | 80mA | 100mA |
Tx Power | -4dBm | -3dBm | 2.5dBm | 3dBm |
Rx Power | -14.4dBm | -12.4dBm | 2dBm | 2.5dBm |
Ordering Information
Part No. |
Data Rate |
Laser |
Fiber Type |
Distance |
Optical Interface |
Temp |
DDMI |
TKSFP25GGLR | 25.78Gbps | CWDM DFB | SMF | 20KM | LC | -5~70 °C | Y |
TKSFP25GGLRI | 25.78Gbps | CWDM DFB | SMF | 20KM | LC | -40~85 °C | Y |
CWDM WAVE=1270nm, 1290nm, 1310nm, 1330nm, 1350nm, 1370nm.