Description
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTX commun
ication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provi
des solid protection and management for the FTTx network building.
Features
1. Total enclosed structure. Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65.
2. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.
3.Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC adaptor installation, easy maintenance.
4.Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
5.Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
Specification
1. Environmental requirement
Working temperature:-40ºC~+85ºC
Relative humidity:≤85%(+30ºC)
Atmospheric pressure:70KPa~106Kpa
2. Main technical datasheet
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3. Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than2MΩ/500V(DC);
IR≥2MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover.U≥3000V
Configuration table
Table 1 Model and configuration
Installation
1.Wall-mounted installation
Drill 4 holes over the wall based on the size in table 1,place the expansion bolt Φ7.5*40,place the box to
match up the holes and use bolt to fasten.
2.Pole-mounted installation
Fix 1 set of the easy pole ring to the telecom pole .
Accessories
1. Users' Manual*1.
2. Key*1.
3. Accessories Bag * 1.
4.Easy pole ring*2,M6*20mm Bolt*2(Option).
Any question about this 24 port fiber terminal box,please leave me an inquiry or contact me directly.
Audited Supplier 
){kind=link}