8+2+1 Port Poe Ethernet Switch

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: 8 Port POE Ethernet Switch
• Ports: ≦8
• Name: 8+2+1 Port Poe Ethernet Switch
• Model: Df-1f2g-8gp
• Network Ports: Ethernet Port: 10/100/1000Mbps
• Transmission Distance: Ethernet Port: 0~100m or Reach up to 250m
• Transmission Media: Cat5e/6 Standard UTP Cable
• Poe Agreement: IEEE802.3 Af/at Standards
• Poe Power Supply Wattage: Each Port<30W,Whole Device<250W
• Network Standard: IEEE 802.3/802.3u
• Swap Mode: Store-and- Forward
• Mac Address List: 4K
• Transport Package: Individual Box or According to Customer′s Request
• Specification: CE, ROHS, ISO
• Trademark: Takfly
• Origin: China
• Production Capacity: 10000/Per Week

Product Description

DF-1F2G-8GP Features:    Fully IEEE802.3af/at standard compliant.    Support PoE power up to 15.4/25.5W for each PoE ports.    Support 250m PoE distance transmission    Plug & Play. No configuration required.    Reliable and great value.   4KV Surge protection Introduction: This new 11 ports PoE switch provides power and data from a single point, using Power over Ethernet(PoE) over a single Cat5 cable. It can be used for any 10/100/1000Mbps link PoE port with 3 more gigabit Uplink and  supply  industry-standard  IEEE  802.3af  /at  power.  Advanced  auto-sensing  algorithm  gives  power  to 802.3af/at end devices,In addition,the PoE switch automatically determines PoE requirements, speed, duplex. Easy  to  operate  and  reliable.      .  It  also      provides  a  switch  button  to  extend  the  Ethernet  transmission distance of 8 POE Ethernet ports up to 250m which make the installation more flexible. This  PoE  switch  is  ideal  for  powering  PoE  devices  such  as  IP  cameras,WLAN  access  points,  IP  phones, office access control systems, and other PD devices and offers a line of high quality products that provide a total solution for ethernet application in different environments.
Specification parameter:
Model	DF-1F2G-8GP
Ordering info	DF-1F2G-8GP
Ports description	POE port	1-8ports:10/100/1000M Auto-Negotiation RJ45
	UPlink port	9-10port:10/100/1000M Auto-Negotiation RJ45 11 ports:1000M SFP Uplink
POE power	MAX POE output		30W
	Total power consumption		250W
LED indicators	PWR(Power indicator light), POE(POE indicator),Link/Act(Link / activity indicator)
Proccessing types	Store and forward
Transmission model	IEEE802.3X full-duplex and Backpressure half-duplex
Performance specification	Backplane bandwidth		20Gbps
	Packet forwarding rate		4.16Mpps
	MAC address		4k
Network standard	IEEE802.3i 10 BASE-T IEEE802.3u 100 BASE-TX IEEE802.3ab 1000 BASE-T IEEE802.3x Flow Control IEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet IEEE802.3az EEE
Input volatage	AC110-220V. 50/60Hz, total 120W power
Weight	0.4KG
Dimension	310mm x 180mm x 44.5mm(W×D×H)
Cable requirements	UTP cat5 or abover
Environment specification	Operating temperature: -10ºC~45ºC,operating humidity: 10%~90%
	Storage temperature: -20ºC~70ºC,storage humidity: 5%~95%

 
Note:If any changes with product specification, forgive without prior notice.

1. As transmission distance has certain relation with the cable, so you are suggested to use standard cat5e/6 cable for longest distance needed.

3.V-lan

3.1 Introduction
    When V-lan function is opened, the LAN port can't make data conversion but can only communicate via uplink port. The V-LAN workstation is built separately between every network port and UP-LINK port.
In the same V-lan workstation, no matter which actual PoE switch being connected, the signal transmission are separately isolated from each other which seems they are on the different switches. The broadcast in the same V-lan can only be received by the members but can't be transmitted into other V-lan, which can greatly control unnecessary broadcast storm. What's more, different V-lan can't even communicate with each other when there is no routing, which increases the safe degree among different department in the enterprise.
3.2 Configuration
   Toggle the V-lan button on the back of the switch to ON state, V-lan indicator lights, then press the reset button to restart the switch, in this way V-lan functions.
Note:
   Please press reset button or repower the device when turn on V-lan, only in this way the switch can enter corresponding mode.
 

4.Troubleshooting

When the device encountered with troubles, it can be solved by the methods below:
1) Make sure the device is installed correctly referring to the requirements;
2) Make sure RJ45 cable is good contacted without open circuit; the cable design complies with EIA/TIA568A or 568B international standards.
3) Each PoE port can provides max 30W to switch and the total power is less than the maximum power provided by the device. So please don't connect with the PoE device which is more than 30W.
4) Press reset button to check if the device can work properly.
5) Replace the trouble device with a normal working device to check if the device is damaged.
6) If all the above methods still don't work, please contact with manufacturer directly.

5.Product Overvview



6.Certificate

7.Exhibition

Our Services:
 
1.Order inquiry: Keep working time from 9AM to 23PM to gurantee the first reply to clients,and 24 hours no Cellphone power off 
 
2.Order production: Keep very close touch with production department to gurantee the right delivery time to clients       
 
3.Before shipment: Our sales would double check the order quantity,package and strength of cartons to avoid lost and damage 
 
4.After shipment: Keep tracking shipping status and reporting to clients 
 
5.Shipment: DHL,UPS,FEDEX,TNT,EMS,SEA,AIR etc. 
 
If you interest or have any question, Why not send inquiry?  Welcome & Just Do It !!!