Product Description
8 Port Poe Switch with 1000M and Ethernet switch(SFP + Uplink port)
1.DF-1.25G-8P-1E is a 10-Port Gigabit PoE Switch with 8 PoE Ports, 1 SFP Gigabit Uplink Optical Ports and 1 Gigabit RJ45 Uplink port, port 1 to port 8 supports PoE IEEE 802.3at international standard, each port power is 30W . Total power is 120W.
This POE network switch can meet customer's general demands. POE network switch with POE function, designed for high-definition network camera's internet access. It provides 8 1000Mbps PoE Ethernet switches, complies with IEEE802.3af/at standards, and also simplifies wiring, avoids the troublesome of installing power socket for powered devices.
2. Highlight
No Frame Loss IP Data Transmission
PoE+ Standard 250m in One-key CCTV Mode
10 KB Jumbo frames support
Few video time delay
4KV Lightning Protection
3. Features
10-Port Gigabit PoE Switch with 8 PoE Ports, 1 RJ45 uplink, 1 SFP Gigabit Uplink Optical Ports
Supply power to wireless access points AP and network IP surveillance cameras
Port 1 to Port 8 supports IEEE802.3at power (each port maximum power is 30W)
8x 10/100/1000 Mbps ports + 1RJ45 + 1x SFP gigabit optical uplink ports
Compatible with IEEE 802.3 10i and IEEE 802.3u standard
The packet forwarding speed is 1.488Mbps of one wire-speed port
Port features with auto-flip(Auto MDI/MDIX)
Network port comes with lighting-proof
All ports support wire-speed switching, frame size within the range of 64 to 1536 can achieve wire-speed
Automatic adjustment, plug and play, no need software and protocol conversion
4.Specification
| Item |
Description |
| Model |
DF-1.25G-8P-1E |
| Power Supply |
Power Supply Mode |
Mains on load |
| |
Voltage Range |
AC 100~240V |
| |
Power Consumption |
The device <5W, POE power supply <120W |
| Network Port Parameter |
Network Ports |
1~8 Ports: 10/100/1000Mbps Ethernet port, adaptive control
UPLINK Ethernet port: 10/100/1000Mbps Ethernet port
Uplink SFP:1000Mbp |
| |
Transmission Distance |
1~8 Ethernet Port:0~100m
Mandatory 10 Mbps reach up to 250m
1 Ethernet Uplink Port:0~100m
1 SFP: According to different SFP |
| |
Transmission Media |
1~8 Ethernet Port:Cat5e/6 standard UTP cable,
1 Ethernet Uplink Port:Cat5e/6 standard UTP cable
1 SFP: LC interface optical fiber |
| |
POE Agreement |
IEEE802.3 af/at standards |
| |
PoE Power Supply Mode |
End-span method |
| |
PoE Power Supply Wattage |
Each port≤30W,Whole device<120W |
| Network Switch Specification |
Network Standard |
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T |
| |
Swap Mode |
Store-and- forward |
| |
Switch Capacity |
20Gbps |
| |
MAC Address List |
8K |
| Status Indicators |
Power Indicator Light |
One power light (green) |
| |
Optical Fiber Port Indicator |
One fiber link indication light ( green), Green light keeps on when the fiber port is well connected; Blinking when transceiver data |
| |
FE Uplink Port |
LED (Green): On, port is link on; Off, port is link down; |
| |
PoE Indicator |
1~8 PoE indicator light(yellow) |
| |
PoE Network Port LED |
1~8 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data |
| Switch |
Switch 1(Vlan) |
ON: Vlan open, 1 to 8 POE ports only can communicate with uplink port; OFF: Vlan close, normal status |
| |
Switch 2(CCTV Mode) |
ON: Vlan open, 1 to 8 POE ports only can communicate with uplink port, power and data can reach 250 meters;
OFF: Vlan close, normal status |
| Protection Level |
Surge Immunity |
Level 3, executive standard:IEC61000-4-5 |
| |
Electrostatic Protection |
1a touch electric discharge: level 3
1a Air discharge: level 3 Executive standard:IEC61000-4-2 |
| Operating Environment |
Working Temperature |
-10ºC~55ºC |
| |
Storage Temperature |
-40ºC-85ºC |
| |
Humidity(non-congeal) |
0~95% |
| Mechanical Attributes |
Dimensions (L*W*H) |
188.5mmx102.5mmx28.25mm |
| |
Color |
Black |
| |
Weight |
1kg |
| Reliability |
Mean time between failures (MTBF) |
>50000h |
Why choose Takfly ?
Service
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Quality Control
All products must go through five checks before manufacturing process
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Advantages:
1.15 years experience in manufacturing fiber optic products..
2.Availability of R & D with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 workers
7.Excellent service
Delivery:
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirm
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen China or HK
5.Shipping term: EXW or FOB
Payment:
Acceptable by T/T, West Union, PayPal and L/C according to your requirement
Shipping:
1.Once confirmed the order, and payment sent after finishing goods. 2.Goods will be sent within 7 days with the fast,reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc.
3.Please make sure your postal address is correct. Any lost and mistakes because of wrong address are not supplier's responsibility.
4.Please do not bid if you disagree with the shipping and handling charge.
Contact:
1.Our working time:8:30am~5:30pm
2.All the inquiries will be replied within 24hours, So please feel free to send us your inquiry.
3.When our trade manager is off line, please feel free to leave a message, and tell us the products you need, our model number, and your E-mail address, we will reply to you within 24 hours too.
Any question about this 8 port poe switch,please leave me an inquiry or contact me directly.
Audited Supplier 
){kind=link}