DF-155M-8P-F 10/100M 8 Ports Power Over Ethernet Switch with Marvell chip
1.Overviews
DF-155M-8P-F is specialized unmanaged POE switch designed for video surveillance and network project system, etc. It provides 8 x 100Mbps Ethernet ports and 1 x 100Mbps fiber optical port, support VLAN function, can effectively prevent whole system from broadcast storm so that make the data transfer more safe.
This POE network switch can meet customer's general demands. POE network switch with POE function, designed for high-definition network camera's internet access. It provides 8 100Mbps PoE Ethernet switches, complies with IEEE802.3af/at standards, and also simplifies wiring, avoids the troublesome of installing power socket for powered devices.
2.Features
1.Provide 8 x 100Mbps Ethernet ports, 1 x 100Mbps fiber optical port;
2.Support End-Span method, complies with IEEE802.3 af/at standards, can supply max 30W power which is possible to power high-power infrared cameras;
3.Comply with IEEE802.3, IEEE802.3u, IEEE802.3af/at standards;
4.Support IEEE802.3x full-duplex flow control, support Auto MDI/MDIX;
5.Support port-base Vlan, prevent from broadcast storm so that make data conversion more efficient and safe;
6.Various LED display functions can real-timely display the device's current working conditions, and help prompt facility and remove trouble easily;
7.Excellent lightning protection, lightning capacity up to 2KV;
8.Easy to install and operate on walls or on the desktops;
3.Technical Specifications
| Item |
Description |
| Model |
DF-155M-8P-F |
| Power Supply |
Power Supply Mode |
Power Adaptor |
| Voltage Range |
DC 48~56V |
| Power Consumption |
The device <5W, POE power supply <120W |
| Network Port Parameter |
Network Ports |
1~8 Ethernet Port:10/100Mbps
1 Uplink optical fiber port:SC/FC/ST |
| Transmission Distance |
1~8 Ethernet Port:0~100m
Mandatory 10 Mbps reach up to 250m
Uplink optical fiber port:single mode fiber 20km |
| Transmission Media |
1~8 Ethernet Port:Cat5e/6 standard UTP cable, Uplink optical Port:optical fiber |
| POE Agreement |
IEEE802.3 af/at standards |
| PoE Power Supply Mode |
End-span method |
| PoE Power Supply Wattage |
Each port≤30W,Whole device<120W |
| Network Switch Specification |
Network Standard |
IEEE 802.3/802.3u |
| Swap Mode |
Store-and- forward |
| Data-Caching Mechanism |
1M |
| MAC Address List |
2K |
| Status Indicators |
Power Indicator Light |
One power light (Green) |
| Optical Fiber Port Indicator |
One fiber link indication light ( green), Green light keeps on when the fiber port is well connected; Blinking when transceiver data |
| FE Uplink Port |
LED (Green): On, port is link on; Off, port is link down; |
| PoE Indicator |
8 PoE indicator light(yellow) |
| PoE Network Port LED |
1~8 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data |
| Switch |
Vlan Switch |
On: CCTV Mode, support 250meter power and data
Off: normal mode, support 100meter |
| Protection Level |
Surge Immunity |
Level 3, executive standard:IEC61000-4-5 |
| Electrostatic Protection |
1a touch electric discharge: level 3 1a Air discharge: level 3 Executive standard:IEC61000-4-2 |
| Operating Environment |
Working Temperature |
0ºC~55ºC |
| Storage Temperature |
-40ºC~70ºC |
| Humidity(non-congeal) |
0~95% |
| Mechanical Attributes |
Dimensions (L*W*H) |
188.5mmx102.5mmx28.25mm |
| Color |
Black |
| Weight |
612g |
| Reliability |
Mean time between failures (MTBF) |
>50000h |
| Adapter type |
Britain, American and European standard for your choose |
Note:If any changes with product specification, forgive without prior notice.
1) As transmission distance has certain relation with the cable, so you are suggested to use standard cat5e/6 cable for longest distance needed.
Maybe the following info will be helpful for you to well understand our POE switch.
1.The chips we always use for POE switch are Broadcom and Marvell.
2.In the backside of our POE switch, there is a switch(named default and CCTV switch) can adjust the transmitter distance between POE IP camera and POE switch, pls kindly note the max transmitter distance we can reach is 250m.
3.All our POE switchws are intelligent, therefore it can supply enough worked power for all equipments that POE switch connects with according to the equipments' need. So the customers do not need to worry the equipments will burnout when POE switches supply big power much more than what they need, or the equipments can not work well if POE switches do not supply enough power to them.
4.All our POE switchws are compatible with IEEE802.3 af/at standards.
4.V-lan
4.1 Introduction
When V-lan function is opened, the LAN port can't make data conversion but can only communicate via uplink port. The V-LAN workstation is built separately between every network port and UP-LINK port.
In the same V-lan workstation, no matter which actual PoE switch being connected, the signal transmission are separately isolated from each other which seems they are on the different switches. The broadcast in the same V-lan can only be received by the members but can't be transmitted into other V-lan, which can greatly control unnecessary broadcast storm. What's more, different V-lan can't even communicate with each other when there is no routing, which increases the safe degree among different department in the enterprise.
4.2 Configuration
Toggle the V-lan button on the back of the switch to ON state, V-lan indicator lights, then press the reset button to restart the switch, in this way V-lan functions.
Note:
Please press reset button or repower the device when turn on V-lan, only in this way the switch can enter corresponding mode.
5.InstallationPacking List
Before installation, please check the following equipment and accessories, if there are any missing, please contact with your supplier.
1) 1 set of DF-1.25G-8P-2F
2) 1 AC cable
3) 1 user manual
Please install as below steps:
1.Before installation, please turn off the power of all signal sources and the monitor in case of the damage to transmission device;
2.Using network cables to connect with Ethernet ports of IP cameras and POE ports of PSE-2 series unmanaged POE switch;
3.Using UP-LINK port to connect NVR or computer etc;
4.Device Check weather installation is correct and the device undamaged;
5.Before power on PSE-2 series unmanaged POE switch, make sure that all connections are reliable;
6.Confirm all network devices are powered and can work normally;
6.Troubleshooting
When the device encountered with troubles, it can be solved by the methods below:
1) Make sure the device is installed correctly referring to the requirements;
2) Make sure RJ45 cable is good contacted without open circuit; the cable design complies with EIA/TIA568A or 568B international standards;
3) Each PoE port can provides max 30W to switch and the total power is less than the maximum power provided by the device. So please don't connect with the PoE device which is more than 30W;
4) Press reset button to check if the device can work properly;
5) Replace the trouble device with a normal working device to check if the device is damaged;
6) If all the above methods still don't work, please contact with manufacturer directly;
7.Making methods of RJ45 connector
1.Required tools: wire crimpers, network cable tester;
2.The wire sequence of RJ45l connector must complies with international standard of EIA/TIA 568A or EIA/TIA 568B;
3.Strip about 2cm's of insulating jacket to let 4 pairs UTP can be seen;
4.Separate 4 pairs UTP cable, and try to straighten each pair;
5.Arrange 8 cables with correct line sequence of EIA/TIA 568A or EIA/TIA 568B;
6.Cut thread residue and leave 1.5cm wire which exposed outside the insulating layer, and ensure 8 wires are straight and neat;
7.Put 8 wires in RJ 45 connector, then press with wire crimpers;
8.Repeat above five steps , make the other side of UTP cable; Then using the cable tester to test whether the cat5e/6 works normally;
8.Item and company images
9.Company Information
Takfly, established in 2000, has been manufacturing and exporting fiber cable, adapter, attenuator, connector, coupler, splitter, termination box, ODF, fiber instruments, media conceiver, switch, optical module, CWDM/DWDM, etc. Takfly's products have passed the management verification: ISO14001: 2004. and goods have passed RoHS, CE, FCC, REACH, EN50575, ISO9001, etc.
So far, Our products have been widely installed in many big worldwide project and work perfectly. Many project contactors ask the first and second operators to purchase fiber items from Takfly for their new project. In addition, we also have builted long term cooperation with Lapp, Amper, Telefonica, orange and Ericsson. All enquiry are warmly welcomed here no matter it's small or big, we promise to provide all customers high quality and good price item.
10.Why choose Takfly ?
Service
1.Customer's logo: Acceptable;
2.General inspection on fixing before packing;
3.Third party inspection: Acceptable;
Quality Control
All products must go through five checks before manufacturing process;
1.Material incoming inspection before production;
2.Full check after every individual process finished;
3.Full check after production half-done;
4.Full check before packing;
5.Spots check after production packed before shipping;
Advantage
1.15 years experience in manufacturing fiber optic products;
2.Availability of R & D with more than 10 engineers;
3.Available of design and making mold with special molding house;
4.High quality, attractive price and fast delivery(2-7days);
5.OEM, ODM customer designs are also welcomed;
6.More than 200 workers;
7.Excellent service;
Delivery
1.Packing: Plastic bag& carton, Neutral packing or as your required;
2.Sample time: 1-3 days after confirm;
3.Order lead time: 2-7working days depend on quantity and products;
4.Shipping port: Shenzhen China or HK;
5.Shipping term: EXW or FOB;
Shipping
1.Once confirmed the order, and payment sent after finishing goods;
2.Goods will be sent within 7 days with the fast, reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc;
3.Please make sure your postal address is correct. Any lost and mistakes because of wrong address are not supplier's responsibility;
4.Please do not bid if you disagree with the shipping and handling charge;
Your inquiry will be warmly welcomed. Pls kindly note you call me at 0086 13537892205.
Audited Supplier 
){kind=link}