Standalone 10G OEO Converter (3R Repeater) with SFP+ to SFP+ Slot, XFP to XFP Slot, SFP+ to XFP Slot optional,which uses optical -electricity - optical conversion principle to realize optical signal regeneration, enabling of the optical signal amplification and regeneration , re-timing, and wavelength conversion , with coarse / dense wavelength division multiplexing together to realized WDM transmission . It is now possible to quickly improve communication capacity , expand the bandwidth on present network , while using low-cost, high cost-effective solutions to manage and run the system, easy operation .
Support 2U Rack(16 Slots) and independent use
Support network management (Web SNMP, Console)
Support in-band management
Support ITUT prescribed DWDM/CWDM wavelength
Support Jumbo Frame
Transparent Transpor and very low delay
Support DMI function for SFP+/XFP fiber module
Support Loopback test function
Support PRBS Generator and checker
Support hot plugging
Full State Led display
|Performance Data||Technical Indexes|
|Equipment function||3R Repeater|
|Transmission Speed||10Gb/s ( 9.95Gb/s-11.35Gb/s )|
|Access Type||10G LAN/ 10G WAN|
|Interface Type|| Type A: SFP+ To/From SFP+|
Type B: SFP+ To/From XFP
Type C: XFP To/From XFP
|Transmission Distance||SFP+ module: Up to 80Km|
XFP module: Up to 80Km
|• Card type information|
• SFP+ or XFP fiber module detection
• SFP+ or XFP fiber module DMI function (Temperature, Voltage, Optical power)
• Link status detector
• Enable/Disabled Loopback test function
• Enable/Disable PRBS Generator and checker function
• Rate select ( 10Gbase-Lan or Wan )
• Remote card's status monitor ( only in pairs )
|power requirement||Rack-mountable : AC 85 ~ 220V OR DC -48V|
Standalone: AC 220V OR DC -48V
Power consumption: ≤6W
|Work Environment||Operating Temp: 0~ 50 ºC|
Storage Temp: -10~ 70 ºC
Humidity: 5%~90% ( non-condensing )
|Dimension||Card: 115mm (W) × 78mm (D)|
Standalone: 156mm (W)×128mm(D)×32mm (H)
All products must go through five checks before manufacturing process
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
1.15 years experience in manufacturing fiber optic products..
2.Availability of R & D with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 workers
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirm
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen China or HK
5.Shipping term: EXW or FOB / C&F
Acceptable by T/T, West Union, PayPal and L/C according to your requirement
1.Once confirmed the order, and payment sent after finishing goods. 2.Goods will be sent within 7 days with the fast,reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, ETC.
3.Please make sure your postal address is correct. Any lost and mistakes because of wrong address are not supplier's responsibility.
4.Please do not bid if you disagree with the shipping and handling charge.
1.Our working time:8:30am~5:30pm (if urgent, please call +86 13632482450)
2.All the inquiries will be replied within 24hours, So please feel free to send us your inquiry.
3.When our trade manager is off line, please feel free to leave a message, and tell us the products you need, our model number, and your E-mail address, we will reply to you within 24hours too.
Dear friend * if you have any questions* please don't hesitate to contact me * ^-^ *
My Name: Luis Lee *^-^*
Telephone: 86-755-2810 6528;
Have a happy shopping time *^-^*