FTTX Fosc 288 Cores Dome Type Fiber Optical Joint Closure
This series closure is 1-in-6-out mechanical seal Fiber Optical Joint Closure and is suitable for straight way and branch connection of optical cable aerial and direct burial splicing. This product adapts opening high quality engineering plastic closure body. The closure body and base adapt pressed silicon rubber seal structure. Cable incoming hole adapts mechanical screw seal. After sealing, the product can be opened repeatedly.
(1) The sealing device of the closure adopts self-impacted hoop. The closure will be sealed perfectly while the hoop fastened.
(2) It solves the universal problem, could be used for different sizes of cables; and could be used for both single core and ribbon fibers; apply to pole-mounting, aerial, and direct buried applications.
(3) Adequate space for storage of fibers is enough for coiling of spare fibers
(4) There is fixing and storage device for spare fibers at the rear side.
(5) Adopt high grade imported material to ensure long lifetime.
3. Standard accessories:
FCST012206 box 1 set, sealing gasket 1set, splice tray 1 set, cable fixing device 1 set, pole-mounting hoop 1 set, splice protective sleeve, nylon tie 12 pieces, sand paper, silver paper, insulating tape 1 roll
4. Optional accessories:
Grounding device 1 set;
valve 1 set;
erial mounting hoop 1 set;
heat shrink sleeve(Φ65) 1 piece;
heat shrink sleeve(Φ30) 4 pieces,slit clip 1 piece;
grounding wire for armor layer 6 pieces;
|Main accessories and special tools|
|No.||Name of accessories||Quantity||Usage||Remarks|
|1||Heat shrinkable protective sleeve|| ||Protecting fiber splices||Configuration as per capacity|
|2||Nylon tie|| ||Fixing fiber with protective coat||Configuration as per capacity|
|3||Heat shrinkable fixing sleeve (single)|| ||Fixing and sealing single fiber cable||Configuration as per requirement|
|4||Heat shrinkable fixing sleeve (mass)|| ||Fixing and sealing mass of fiber cable||Configuration as per requirement|
|5||Branching clip|| ||Branching fiber cables||Configuration as per requirement|
|6||Earthing wire||1 piece||Putting through between earthing devices|| |
|7||Desiccant||1 bag||Put into FOSC before sealing for desiccating air|| |
|8||Labeling paper||1 piece||Labeling fibers|| |
|9||Special wrench||1 piece||Tightening nut of reinforced core|| |
|10||Metal hoop||1 set||For wall mounting and pole hugging|| |
|11||Buffer tube||decided by customers||Hitched to fibers and fixed with FOST, managing buffer.||Configuration as per requirement|
|12||Aluminum foil paper||1 pc||Protect the bottom of Fiber Optic Splice Closure and cable inlet/outlet tubes when heat the heat shrinkable sleeves.|| |
If you have any questions about the Fiber Optical Joint Closure or other fiber optic products,please don't hesitate to contact me
My Name: Eva Lin
Mob: +86-1363 114 9941