48/72/96/144/192/240/288 Cores Vertical Type Fiber Optic Cable Joint Box
The Fiber Optic Cable Joint Box is designed for configuration flexibility, these closures offer expanded slack storage, various tray heights and mass platform storage.
The Takfly Fiber Optic Cable Joint Box include hermetically sealed and free-breathing solutions. The hermetically sealed closures include Light Linker, and fiber dome closures; they can be used for any outside plant application.
• The sealing device of the closure adopts self-impacted hoop. The closure will be sealed perfectly while
the hoop fastened.
• It solves the universal problem, could be used for different sizes of cables; and could be used for both
single core and ribbon fibers; apply to pole-mounting, aerial, and direct buried applications.
• Adequate space for storage of fibers is enough for coiling of spare fibers
• There is fixing and storage device for spare fibers at the rear side.
• Adopt high grade imported material to ensure long lifetime.
FCST012206 box 1 set, sealing gasket 1set, splice tray 1 set, cable fixing device 1 set, pole-mounting hoop 1 set, splice protective sleeve, nylon tie 12 pieces, sand paper, silver paper, insulating tape 1 roll
Grounding device 1 set, valve 1 set, aerial mounting hoop 1 set,heat shrink sleeve(Φ65) 1 piece,heat shrink sleeve(Φ30) 4 pieces,slit clip 1 piece, grounding wire for armor layer 6 pieces, protective tube
|Main accessories and special tools for the Fiber Optic Cable Joint Box|
|No.||Name of accessories||Quantity||Usage||Remarks|
|1||Heat shrinkable protective sleeve|| ||Protecting fiber splices||Configuration as per capacity|
|2||Nylon tie|| ||Fixing fiber with protective coat||Configuration as per capacity|
|3||Heat shrinkable fixing sleeve (single)|| ||Fixing and sealing single fiber cable||Configuration as per requirement|
|4||Heat shrinkable fixing sleeve (mass)|| ||Fixing and sealing mass of fiber cable||Configuration as per requirement|
|5||Branching clip|| ||Branching fiber cables||Configuration as per requirement|
|6||Earthing wire||1 piece||Putting through between earthing devices|| |
|7||Desiccant||1 bag||Put into FOSC before sealing for desiccating air|| |
|8||Labeling paper||1 piece||Labeling fibers|| |
|9||Special wrench||1 piece||Tightening nut of reinforced core|| |
|10||Metal hoop||1 set||For wall mounting and pole hugging|| |
|11||Buffer tube||decided by customers||Hitched to fibers and fixed with FOST, managing buffer.||Configuration as per requirement|
|12||Aluminum foil paper||1 pc||Protect the bottom of Fiber Optic Splice Closure and cable inlet/outlet tubes when heat the heat shrinkable sleeves.|| |
If you have any questions about the Fiber Optic Cable Joint Box or other products,please send a inquriy to me or contact with me.
My Name: Eva Lin
Telephone: 86-755-2810 6528