Cisco Compatiable Gigabit Sm Bidi 1490/1550nm 60-80km SFP Module

• Type: Fiber Transceiver
• Wiring Devices: ODF
• Certification: CE, ISO, RoHS, GS
• Condition: New
• Products Name: 1.25g Sm Bidi 1490/1550nm 60km SFP
• Wavelength: 1490/1550nm
• Model NO.: 1.25g SFP Module
• Transmission Distance: 60km
• Fiber Port: Single Fiber LC
• Industrial Temperatureperature: -40 to +85°c
• Commercial Temperature: 0 to +70°c
• Compatiable: HP/Cisco/Hw etc
• Transport Package: Blister Box+Standard Carton
• Specification: SFP
• Trademark: Takfly
• Origin: Shenzhen, China
• HS Code: 8517706000
• Production Capacity: 50000000 Pieces/Week

Product Description

Cisco Compatiable Gigabit SM Single Fiber BIDI 1490/1550 60-80KM SFP Module DDM

Features
1)Dual data-rate of 1.25Gbps/1.063Gbps operation
2)1490nm&1550nm DFB laser and PIN photodetector for 80km transmission
3)Compliant with SFP MSA and SFF-8472 with simplex LC receptacle
4)Digital Diagnostic Monitoring:Internal Calibration or External Calibration
5)Compatible with RoHS
6)+3.3V single power supply
7)Operating case temperature:Standard :  0 to +70°C

Detail pics




Applications
1)Gigabit Ethernet
2)Fiber Channel
3)Switch to Switch interface
4)Switched backplane applications
5)Router/Server interface
6)Other optical transmission systems

Description
The SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 80km transmission distance with SMF.
The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

Spec
Table 1 - Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Supply Voltage	Vcc	-0.5	4.5	V
Storage Temperature	Ts	-40	+85	°C
Operating Humidity	-	5	85	%

Recommended Operating Conditions
Table 2 - Recommended Operating Conditions

Parameter			Symbol	Min	Typical	Max	Unit
Operating Case Temperature		Standard	Tc	0		+70	°C
Power Supply Voltage			Vcc	3.13	3.3	3.47	V
Power Supply Current			Icc			300	mA
Data Rate	Gigabit Ethernet				1.25		Gbps
	Fiber Channel				1.063

Electrical Characteristics
(DFB and PIN, 80km Reach)
Table 3 - Optical and Electrical Characteristics

Parameter		Symbol		Min	Typical	Max	Unit	Notes
Transmitter
Centre Wavelength			λc	1530	1550	1570	nm
Spectral Width (-20dB)			λ			1	nm
Side Mode Suppression Ratio			SMSR	30			dB
Average Output Power			Pout	-2		+3	dBm	1
Extinction Ratio			ER	9			dB
Optical Rise/Fall Time (20%~80%)			tr/tf			0.26	ns
Data Input Swing Differential			VIN	400		1800	mV	2
Input Differential Impedance			ZIN	90	100	110	Ω
TX Disable	Disable			2.0		Vcc	V
	Enable			0		0.8	V
TX Fault	Fault			2.0		Vcc	V
	Normal			0		0.8	V
Receiver
Centre Wavelength			λc	1470		1510	nm
Receiver Sensitivity						-25	dBm	3
Receiver Overload				-3			dBm	3
LOS De-Assert			LOSD			-31	dBm
LOS Assert			LOSA	-35			dBm
LOS Hysteresis				1		4	dB
Data Output Swing Differential			Vout	400		1800	mV	4
LOS			High	2.0		Vcc	V
			Low			0.8	V

Notes:
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 27-1 test pattern @1250Mbps, BER ≤1×10-12.
4. Internally AC-coupled.

Timing and Electrical
Table 4 - Timing and Electrical

Parameter	Symbol	Min	Typical	Max	Unit
Tx Disable Negate Time	t_on			1	ms
Tx Disable Assert Time	t_off			10	µs
Time To Initialize, including Reset of Tx Fault	t_init			300	ms
Tx Fault Assert Time	t_fault			100	µs
Tx Disable To Reset	t_reset	10			µs
LOS Assert Time	t_loss_on			100	µs
LOS De-assert Time	t_loss_off			100	µs
Serial ID Clock Rate	f_serial_clock			400	KHz
MOD_DEF (0:2)-High	VH	2		Vcc	V
MOD_DEF (0:2)-Low	VL			0.8	V

 
Diagnostics
Table 5 - Diagnostics Specification

Parameter	Range	Unit	Accuracy	Calibration
Temperature	0 to +70	°C	±3°C	Internal / External
Voltage	3.0 to 3.6	V	±3%	Internal / External
Bias Current	0 to 100	mA	±10%	Internal / External
TX Power	-2 to +3	dBm	±3dB	Internal / External
RX Power	-25 to -3	dBm	±3dB	Internal / External

Pic of Takfly




Why choose Takfly ?
Service
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
 
Quality Control
All products must go through five checks before manufacturing process
 
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
 
Advantages:
1.15 years experience in manufacturing fiber optic products..
2.Availability of R & D with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 workers
7.Excellent service
 
Delivery:
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirm
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen China or HK
5.Shipping term: EXW or FOB
 
Payment: 
Acceptable by T/T, West Union, PayPal and L/C according to your requirement
 
Shipping 
1.Once confirmed the order, and payment sent after finishing goods. 2.Goods will be sent within 7 days with the fast,reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc.
3.Please make sure your postal address is correct. Any lost and mistakes because  of wrong address are not supplier's responsibility.
4.Please do not bid if you disagree with the shipping and handling charge.
 
 
Contact
1.Our working time:8:30am~5:30pm 
2.All the inquiries will be replied within 24hours, So please feel free to send us your inquiry.
3.When our trade manager is off line, please feel free to leave a message, and tell us the products you  need, our model number, and your E-mail address, we will  reply to you within 24 hours too.

Any question about this sfp module transceiver,please leave me an inquiry or contact me directly.