ST Embedded Fiber Optic Fast Connector
Description:
Optical Fiber Connector can provide a quick and easy termination of fibers in the field. Options are available for 900 micron allowing the installer to terminate and make connection in minutes at equipment and fiber patch panels. Our quick connector system removes any requirement for epoxy, adhesives or costly curing ovens.All the key steps have been done in the factory to ensure every connection is excellent.High quality but low price because we bring these in direct from the manufacturer.
Feature:
1).Low insertion loss
2).High return loss (low amounts of reflection at the interface)
3).Ease of installation
4).Low cost
5).Reliability
6).Low environmental sensitivity
7).Ease of use
Application:
1).CATV
2).Active device termination
3).Telecommunication networks
4).Metro
5).Local Area Networks (LANS)
6).Data processing networks
7).Test equipment
8).Premise installation
9).Wide Area Networks(WANS)
Specifications:
| Mode |
SM |
MM |
| Polish |
UPC |
APC |
PC |
| Insertion Loss |
≤0.2dB |
≤0.3dB |
≤0.2dB |
| Return Loss |
≥55dB |
≥65dB |
≥35dB |
| Interchangeability |
≤0.2dB |
| Salt Spray |
≤0.1dB |
| Repeatability |
≤0.1dB (1000 times) |
| Vibration |
≤0.2dB (550Hz 1.5mm) |
| Temperature |
≤0.2dB (-40+85 sustain 100 hours) |
| Humidity |
≤0.2dB (+25+65 93 R.H.100 hours) |
| Apex Offset |
0μm ~ 50μm |
| Radius of Curvature |
7mm ~ 25mm |
Any question about this ST fast connector,please leave me an inquiry or contact me directly.
Audited Supplier 
){kind=link}
){kind=link}